Automatic hardness testers for Rockwell, Superficial Rockwell, Brinell, Vickers and Shore test methods in compliance with ASTM and ISO hardness standards. MRS Series are top level bench hardness testers for tough or lab applications. Fully motorized for fully automatic test cycles. Absolute accuracy (better than 0.5 %) in every condition. Load forces are applied through load cells and electronically controlled in Closed Loop (Pat. Affri). Exact hardness result on the first test and R&R data at the top of his class. Digital durometers with LCD screen, user friendly interface, real time statistics, graphs and large archive storage. Hardness testing on all metals: iron, steel, tempered steel, cast iron, brass, aluminum, copper and metal alloys. Heat treatment, hardening, nitriding, cementation and hardfacing. Hard and soft plastics.

Digital hardness testers for Brinell and Vickers test method in compliance with ASTM, ISO and JIS hardness standards. Load range from 10 to 3000 kgf. LD 3000 hardness testers are low cost bench hardness testers with high accuracy standards. Really simple to use, just one single button for the entire test. Load forces are applied through load cells and controlled in "Closed Loop" with a frequency of 1 khz, assuring perfect linearity in every range. Hardness tests on all metals: iron, steel, tempered steel, cast iron, brass, aluminum, copper and metal alloys.

Automatic Hardness tester for micro and macro Vickers, Knoop, Brinell and Rockwell test methods. WIKI JS is the top-of-the-line of automation and accuracy for Vickers and Knoop hardness measurements in compliance with ASTM and ISO hardness standards. It is a fully motorized system for Case Hardness Depth test (CHD) on single or multiple samples in automatic cycle. Everything is automated, freeing users for other tasks and minimizing subjectivity associated with human intervention. Just map-out indentation traverses where they are required, set the load and press START, the hardness tester intelligently follows the predefined patterns, indents the sample, focuses when needed, measures, and generates data dynamically. Load forces are applied through load cells and electronically controlled in "Closed Loop" (Pat. AFFRI) with a frequency of 1 khz, assuring perfect linearity in every range, even on very low loads. For micro-macro Vickers and CHD case depth tests on all metals: iron, steel, tempered steel, cast iron, brass, aluminium, copper and metal alloys. Heat treatment, hardening, nitriding, cementation and hardfacing. Knoop test on ceramic and glass materials.

Universal hardness testers for Vickers, Rockwell, Superficial Rockwell and Brinell hardness test methods in compliance with ASTM and ISO hardness standards. LD 250 and LD750 are top level bench hardness testers for fully automatic test cycles including indentation autoreading through the high resolution camera. Entirely motorized and equipped with an automatic turret with indenters and magnification lenses. The instrument allows for hardness measuring in different hardness scales with just one tester, without the need of several testers in own laboratory. Load forces are applied through load cells and electronically controlled in Closed Loop (Pat. Affri). Wide touchscreen for easy test planning and a clear view of results. Statistics and charts are automatically generated and can be stored with test sessions in the large archive. User friendly interface with conversion tables and round correction values for tests on covex cylindrical surfaces or various diameters. Hardness tests on all metals: iron, steel, tempered steel, cast iron, brass, aluminum, copper and metal alloys. Heat treatment, hardening, nitriding, cementation and hardfacing. Knoop test on ceramic and glass materials.

AUTOMATIC HARDNESS TESTS ON CRANKSHAFTS AND CAMSHAFTS IN COMPLIANCE WITH ISO 6508 E ASTM E18/E10/E103 STANDARDS Rockwell - Superficial Rockwell - Brinell / Test loads from 1 to 250 kgf (9,807 to 2452 N) The tester is made with a modular structure so that it can easily fit different size test pieces. Equipped with movements on 3 independent axis and piece rotation of 360° to allow for an easy location of testing points. Accurate and effective measurement even on the first test. The indenter is very thin and long. A long and strong guide protects the indenter from shocks and allows tests very close to the connections. With this hardness tester, it is possible to perform measurements directly during manufacturing process, so that the annealing oven staff can be informed in real time about test results.

Digital portable hardness tester for Rockwell, Superficial Rockwell, Brinell and Vickers methods in laboratory or on location with HR direct digital read-out and conversion to other scales through included tables. In compliance with ASTM E3246 - 21, ASTM E104 and ISO 50157 hardness standards. MKII is a small and light portable hardness tester where load forces are applied through a dynamometric load cell and it is operative up to 360° degrees of positioning, even upside down. It is equipped with a LCD operating console with a user friendly interface and extremely easy test settings. Clear view of results, real time statistics, graphs and large archive storage. Hardness tests in laboratory or in loco on tubes, profiles, valves and every bulky or small pieces starting from a thickness of 0.06 mm: small penetration assures excellent results on thin surfaces such as cromium coating or on parts as thin as shave blade profiles. Hardness testing on almost all metals: chromed surfaces, nitrided surfaces, aluminum, brass, copper, bronze, metal wire and hard and soft steel. ASTM E3246 - 21: Standard Test Methods for Differential Indentation Depth Hardness of Metallic Materials ASTM E-10 / ASTM E-18: indirect method on certified test blocks ISO 6506 / ISO 6507 / ISO 6508: indirect method on certified test blocks

ELECTRONIC SHORE - PORTABLE HARDNESS TESTER FOR RUBBER, PLASTIC, MEDICAL COMPONENTS, PAPER AND SPONGE. Shore A - B - C - D - D0 - 0 - 00 - E - M - 000 - 000S Digital portable hardness tester in compliance with ASTM 2240, ISO R.868, DIN 53505, JIS K7215 standards. Slim measuring nose to ensure exact measurement also on small components. Suitable for tires, O-rings, roll, for soft flexible rubber, plastic, PVC, polyester, neoprene, leather, thiokol, nitril rubbers, etc. Operating console with LCD screen. Measure at peak / at time / Continuous, store and number of tests, automatic average, list of stored result, statistic, standard deviation, histogram. Data output for computer or printer connection RS 232 C or USB. The probe can be installed on the bench support, manual or motorized, for laboratory purpose.

REFFERENCE HARDNESS TESTER FOR CALIBRATION LABORATORIES This highly accurate Hardness Tester is designed for laboratories calibrating TEST BLOCKs. it includes Affri System Technology and fully automatic system to perform calibration in accordance with the international standards ASTM, EN, ISO and JIS.